POOL CODE SPECIFICATIONS

Independence Industrial Aluminum Fencing has several pool code approved panels with either "thru picket" or flush bottom styles. Flush bottom rails allow a panel to meet pool code regulations by increasing the distance between rails while maintaining a desired height.

Pool codes not only vary by state, but also by locality. Be sure to check the codes in your area before ordering.

PANEL SPECIFICATIONS

• Fence panel must be at least 48" tall
• Distance from the top of the bottom rail to the top of the next highest rail must be at least 45"
• Spacing between pickets must be less than 4"
• Space from the bottom of the bottom rail or picket should be 2" off the ground

gate SPECIFICATIONS

• Must have self-closing hinges and self-closing latches
• Need to open out (away from pool area)
• Opening mechanism of the latch must be at least 54" above the ground
• Must not use a cross brace on gates